|
|
|
LM2
Series
|
|
|
|
Easy
to use
Fully automatic operation - when your
pump is on Clearwater technology is at
work.
Self cleaning cell
Every 5 hours the plates in the cell
reverse polarity in order to prevent
calcium from building up inside the
cell.
Clear cell
You know its working because you can
see the chlorine being made.
|
|
|
|
Built-in
Safety
A flow sensor will shut off the unit
if there is no flow. The gases produced in
the cell are then trapped at the top of
the cell so that they cannot travel back
to the filter or heater.
|
|
|
|
|
|
|
|
|
|
|
|
|
Superchlorinate
Feature
|
Clear
cell
|
Constant
chlorine
production
|
|
|
|
|
|
|
Superchlorinate
feature
One touch of a button provides the
pool with an extra boost of chlorine to
compensate for extreme weather or a larger
number of bathers.
Constant chlorine production
When output is at 50%, most salt
systems will produce 100% ouput for a
period and then shut down for a period of
the same length. The Zodiac Salt System
however will actually produce at 50%
output for the entire period. When a
constant level of chlorine is administered
to the pool, water is easier to balance
and bacteria cannot flourish.
Performance in changing conditions
If salt levels are too high or low,
other salt systems will shut down. Often
this goes unnoticed until it is too late
and the pool is algae-infested and
unsanitary. The Zodiac Salt System
however, can continue to produce chlorine
at high or low levels of salt, ensuring a
safe swimming environment.
Easy installation on almost any
pool
A Zodiac Salt System only needs about
8 inches of space on the pipe after the
pump, filter and any other equipment.
For aboveground pools - It is best to
contact pool manufacture or dealer to
verify that your pool is compatible with a
salt system.
Technical
Specifications LM2-15
Chlorine
Output: 15 g/hour
Salt
Level: 3200-4000 ppm
Input:
220V, 60Hz AC 2 Amp or 110V 60 Hz AC 4 Amp.
Factory set to 220V,
can be converted to 110V, see inside chassis for
directions.
Output:
17.5V 6 Amp DC
Power
Consumption: 150W 220/110 AC supply
Minimum
Flow Rate: 42 litres/minute (11
gallons/minute)
Weight:
10kg (22 lbs)
Dimensions:
Cell: 21cm x 7.5cm x 8cm (8 1/4" x 3" x 3 1/4"
)
Power Pack: 18cm x 37.5cm x 12.5cm (7 5/8" x 14
3/4" x 4 7/8")
Plumbing:
3.8 cm (1 1/2 inches)
Max
operating temperature: 40ºC
(104ºF)
Maximum
operating pressure: 200 kPa (29
psi)
Technical
Specifications LM2-24
Chlorine
Output: 24 g/hour
Salt
Level: 3200-4000 ppm
Input:
220V, 60Hz AC 2 Amp or 110V 60 Hz AC 4 Amp.
Factory set to 220V,
can be converted to 110V, see inside chassis for
directions.
Output:
17.5V 9 Amp DC
Power
Consumption: 200W 220/110 AC supply
Minimum
Flow Rate: 42 litres/minute (11
gallons/minute)
Weight:
10kg (22 lbs)
Dimensions:
Cell: 21cm x 7.5cm x 8cm (8 1/4" x 3" x 3 1/4"
)
Power Pack: 18cm x 37.5cm x 12.5cm (7 5/8" x 14
3/4" x 4 7/8")
Plumbing:
3.8 cm (1 1/2 inches)
Max
operating temperature: 40ºC
(104ºF)
Maximum
operating pressure: 200 kPa (29
psi)
Technical
Specifications LM2-40
Chlorine
Output: 40 g/hour
Salt
Level: 3200-4000 ppm
Input:
220V, 60Hz AC 2 Amp or 110V 60 Hz AC 4 Amp.
Factory set to 220V,
can be converted to 110V, see inside chassis for
directions.
Output:
24.0V 9 Amp DC
Power
Consumption: 300W 220/110 AC supply
Minimum
Flow Rate: 42 litres/minute (11
gallons/minute)
Weight:
10kg (22 lbs)
Dimensions:
Cell: 21cm x 7.5cm x 8cm (8 1/4" x 3" x 3 1/4"
)
Power Pack: 18cm x 37.5cm x 12.5cm (7 5/8" x 14
3/4" x 4 7/8")
Plumbing:
3.8 cm (1 1/2 inches)
Max
operating temperature: 40ºC
(104ºF)
Maximum
operating pressure: 200 kPa (29
psi)
Technical
Specifications AG Model
Chlorine
Output: 10 grams per hour
Salt
Level: 3200-4000 ppm
Input:
110V, 60 Hz, AC 4 Amp or 220V, 60Hz, AC 2
Amp.
Unit is factory set to 110V, can be converted to
220V.
Output:
17.5V 6 Amp DC
Power
Consumption: 100W, 110/220 AC supply
Minimum
Flow Rate: 42 litres/minute (11
gallons/minute)
Weight:
10kg (22 lbs)
Dimensions:
Cell: 21cm x 7.5cm x 8cm (8 1/4" x 3" x 3 1/4"
)
Power Pack: 18cm x 37.5cm x 12.5cm (7 5/8" x 14
3/4" x 4 7/8")
Plumbing:
3.8 cm (1 1/2 inches)
Max
operating temperature: 40ºC
(104ºF)
Maximum
operating pressure: 200 kPa (29
psi)
|
|
|
|
